Showing 25–48 of 132 resultsSorted by latest

5” Start Collar w/ Damper

$10.29

507DR85 5″ #507D 1-1/2″ or 2″ Ductboard Collar with Damper

Supply Plenum R6 16 1/8 x 22 1/8 RP27

$105.34

Knocked down plenums that precisely fit all major manufacturers’ equipment. Options are available to customize our plenums to meet the demands of markets nationwide including:

 

8” Insulated Flex Duct – R8

$90.86

Flexible Insulated Air Duct – R8

Flexible insulated air duct designed for residential and light commercial HVAC applications. Built with a reinforced inner core, heavy-duty outer vapor barrier, and high-efficiency fiberglass insulation to help reduce thermal loss, improve airflow efficiency, and support consistent heating and cooling performance. Its flexible construction allows easier installation in attics, ceilings, crawl spaces, and other tight HVAC areas while helping reduce condensation and energy transfer.

 

HVAC Sealant

$28.76

Hardcast/Carlisle CCWI-181 is a versatile, water-based duct sealant for indoor and outdoor use. It can be used on all types of metal, fiberglass, and flexible ductwork, as well as fabric ductwork and flexible tubing. It features integrated polyester reinforcement for exceptional strength and UV inhibitors for outdoor applications.

UL Listed 181 AM/BM
Meets ASTM C-731 and D-2202 standards.
Approved by the USDA, EPA, and FDA.
LEED Compliant
SCAQMD Rule 1168

10×10 Supply Grill TRU-190

$35.44

Different home heating and air-conditioning designs utilize a variety of filter placement strategies. Most new homes in the “sunbelt states choose to use a filter grille design. As with everything that TRUaire makes, we offer a wide variety of designs to fit virtually every residential application; different fin spacing, different filter thicknesses, and different door designs.

 

16” Motorized Damper

$183.18

A single-leaf, round damper with a 24-volt motor and two positions. The motor operates in both directions: opening and closing. It incorporates LED indicators that show its position (open or closed). The LEDs are red for closed and green for open. These indicators are a safety feature that prevents them from illuminating until the damper leaf reaches its fully open or closed position. The motor has a three-wire connection: one common wire, one for power (opening), and one for closing.

4” x 24” Flue Pipe

$27.45

DuraVent – 4BV24 4″ x 24″ Type B Vent Pipe

 

M&M – 8″ x 60″ 30GA Galvanized Round Snaplock Duct Pipe

$25.85
Dimensions
Length8 inches (in)
Width8 inches (in)
Height60 inches (in)
Weight5.55 pounds (lbs)
Attributes
BrandM&M
ColorSilver
CompositionGalvanized Steel
Country of OriginUSA
Cubic Measurement2.2222
Dimensional Weight53
EAN0845927011926
GalvanizedYES
Gauge30 GA
Pipe Closure TypeSnap-Lock
Pipe Diameter (In)8″
Pipe Length60″
Pipe Size8″ x 5′

Return Plenum 16×19.75×48

$218.78

Plenums that precisely fit equipment from leading manufacturers. We offer options to customize our plenums to meet the demands of markets nationwide, including:

  • 16″ x 19.75″ x 48″
  • Two-piece L-shaped side construction
  • Four-piece construction
  • Beaded for added strength

14” Bypass Damper

$199.06

Installing a zoning bypass gate used to take one to two hours, but that’s a thing of the past. The new  bypass gate is ready to use right out of the box, with minimal setup. Instead of a complicated counterweight system, it features an easy-to-use, preset dial that requires little to no adjustment. Zoning has never been so simple.

36” Gas Flex w/ Valve

$33.29

This gas connector is 36″ long and has 1/2″ male connections.

 

Return Plenum 12.5×23.125×48

$219.62

Plenums that precisely fit equipment from leading manufacturers. We offer options to customize our plenums to meet the demands of markets nationwide, including:

  • 12.5″ x 23″ x 48″
  • Two-piece L-shaped side construction
  • Four-piece construction
  • Beaded for added strength

Supply Plenum R8 16 x 19 3/4 X 48

$218.78

Knocked down plenums that precisely fit all major manufacturers’ equipment. Options are available to customize our plenums to meet the demands of markets nationwide including:

 

8” Start Collar w/ Damper

$13.79

507DR88 8″ #507D 1-1/2″ or 2″ Ductboard Collar with Damper

9” Insulated Flex Duct – R6

$79.04

Insulated Flexible Air Duct

Insulated flexible air duct designed for residential and light commercial HVAC systems. Manufactured with a reinforced inner core, fiberglass thermal insulation, and a durable outer vapor barrier to improve airflow efficiency, reduce energy loss, and ensure reliable heating and cooling performance. Its flexible construction facilitates installation in attics, roofs, basements, and other hard-to-reach areas common in HVAC systems.

Supply Plenum R8 16 x 22 3/4 X 36

$195.28

Knocked down plenums that precisely fit all major manufacturers’ equipment. Options are available to customize our plenums to meet the demands of markets nationwide including:

 

Chip Brush

$1.45

Stiff bristle brushes are ideal for applying a variety of materials and for post-installation cleaning of air conditioners.

4” x 36” Flue Pipe

$42.53

DuraVent – 4BV36 4″ x 36″ Type B Vent Pipe

12” x 10” High Capacity HVAC Media Filter

$196.81

The filters for the 1210 air purifier should be replaced twice a year if you have heating and air conditioning, or once a year if you only have heating. The 1210 and 413 filters are not washable. Failure to replace the filters as frequently as required may cause problems with your heating and cooling system.

6” Insulated Flex Duct – R6

$59.51

Flexible Insulated Air Duct

Flexible insulated air duct designed for residential and light commercial HVAC applications. Built with a reinforced inner core, thermal fiberglass insulation, and durable outer vapor barrier to help improve airflow efficiency, reduce energy loss, and support reliable heating and cooling performance. Its flexible construction allows easier installation in attics, ceilings, crawl spaces, and other tight areas commonly found in HVAC systems.